reTyre Easy Tube 28
reTyre Easy Tube 28
€9,00

With reTyre Easy Tube you can change the tyre tube in 3-5 minutes without needing to take off the wheel hub. Read more


Includes:

1 x reTyre Easy Tube 28"

  • DETAIL
  • TECH SPECS
  • HOW TO MOUNT
  • FAQ

RETYRE EASY TUBE

With reTyre Easy Tube you can change the tyre tube in 3-5 minutes without needing to take off the wheel hub.

  • Perfect for e-bikes and other bicycles that have wheel hubs that are difficult to disassemble 
  • Made with a high quality butyl rubber compound
  • Unique two-end design with groove indent shape
  • Perfect for on-the-go tube change
  • Schrader AV-40 valve type (car tyre valve) - can be inflated on any gas station

SIZE INFORMATION

reTyre Easy Tube fits the following tyre sizes:


ETRTO

Inch, French

Recommended infl. pressure (bar)


37-622

28x1.4, 700x35C

3.5-4.5

40-622

28x1.5, 700x38C

3.0-4.0

42-622

28x1.6, 700x40C

3.0-4.0

47-622

28x1.75, 700x45C

3.0-4.0


1. Pin position 

Attach the starting point to both sides of the tyre before closing the zipper. Check that the starting point is properly attached before you begin to close the zipper.

2. Stretch 

While closing the zipper, stretch the skin a bit to make sure it fits perfectly. Alternate between the sides while you close the zippers to reduce the resistance. The skin should meet itself at the end.

3. Puller 

Finally, when the skin is installed, remember to close the puller into the locked position to secure it.

1.  Prise off the tyre from the rim.

2. Take out the flat inner tube. Cut it.

3. Inflate Easy tube slightly.

4. Insert valve into rim hole and position tube.

5. Check that the joints of the tube is linked closely.

6. Put the tyre back into the rim and check air pressure.

Installation Instructions

  1. Inspect the rim for sharp protrusions and sharp edges and file to smoothness if necessary.
  2. Inspect the tire for any cuts or objects protruding through the tyre. 
  3. Be sure the rim strip covers all spoke ends completely. 
  4. Mount one side of the tyre on the rim. 
  5. Inflate the tube slightly (just enough to hold the tube into shape).
  6. Insert valve into the rim hole and position the tube inside the tyre. 
  7. Make sure that the tube is not twisted around it self after it is seated in the rim,to prevent tube rupture. 
  8. Mount the second side of the tyre on the rim using only your thumbs (or a tyre lever). Do NOT use a screwdriver or any sharp tools. 
  9. Partially inflate the tyre and check that the sides of the tyre are evenly seated around the rim. 
  10. Inflate the tire to proper pressure (marked on the tire sidewall) using a bicycle pump.

What is the difference between a regular tube and Easy Tube?

Easy Tube is a non-continuous tube that allows cutting and easier implementation, without having to remove the wheel. Besides of that, Easy Tube functions the same as any other regular tube, it is made out of same materials, has the same walls.

What are the advantages of Easy Tube?

Easy Tube has more then a few advantages:

  • Easiness of use
  • Quick-mounting
  • No tools required
  • Perfect for outdoor use (on-the-go)
  • Has a car valve so it can be changed/inflated on any gas station!

What is the lifespan of Easy Tube?

Lifespan is absolutely the same as with any other betyl tube.

What material is the Easy Tube made of?

Easy Tube is made out of betyl, a high quality butyl rubber compound.

Do you feel the connecting joint while riding the bicycle?

Absolutely not, the connecting joint is totally seamless. 

Photos From Our Users

Add Related Products

Bag for Skins
€7,00
reTyre Stud Replacement Tool
€14,00

Will reTyre work on my bike?



Most bikes will fit reTyre, but to be sure check what size rims you have ...


and then measure the the areas as shown in the figure and see if it is below the the requirements below.


<63 mm clearance for the 26” and 28” 

<72 mm clearance for the 29” 


Fenders can sometime be a problem, but most are easily adjustable to fit reTyre.

Still not sure? Order a free sizing tool