No, you need to buy a base tyre to use the reTyre system.
- DETAIL
- TECH SPECS
- HOW TO MOUNT
- FAQ
ICE RACER SKIN
*reTyre One base tyre is sold separately.
Active Snow Shedder
Additional built-in functionality includes specially engineered knobs that will flex to shed snow.
300 Dual Compound Studs
This skin has 300 studs with 12 uniquelocations in the contact patch, carefully distributed to ensure safe grip on ice.
Winter Rubber
Our winter rubber compound is engineered to provide optimal traction on ice and snow.
SIZE INFORMATION
28'' = 50-622/28x2.0
29'' = 57-622/29x2.25
All reTyre skins are compatible and interchangeable with the reTyre One base tyre of the equivalent diameter.
PRODUCT WEIGHT
Size 26": 640 with 272 studs
Size 28": 710g with 300 studs
Size 29": 890g with 300 studs
1. Pin position
Attach the starting point to both sides of the tyre before closing the zipper. Check that the starting point is properly attached before you begin to close the zipper.
2. Stretch
While closing the zipper, stretch the skin a bit to make sure it fits perfectly. Alternate between the sides while you close the zippers to reduce the resistance. The skin should meet itself at the end.
3. Puller
Finally, when the skin is installed, remember to close the puller into the locked position to secure it.
1. Pin position
Attach the starting point to both sides of the tyre before closing the zipper. Check that the starting point is properly attached before you begin to close the zipper.
2. Stretch
While closing the zipper, stretch the skin a bit to make sure it fits perfectly. Alternate between the sides while you close the zippers to reduce the resistance. The skin should meet itself at the end.
3. Puller
Finally, when the skin is installed, remember to close the puller into the locked position to secure it.
Can you use the Skins without the base tyre?
Do you need to deflate the base One tyre to zip on the Skin?
No. The Skins fit perfectly to base tyre (reTyre One) inflated and already used on your bike. No extra work required.
Which surfaces is this skin for?
Heavy snow, extreme weather conditions and black ice.
Can I mix and match different skins?
Depending on your ride style, weather conditions and personal preference, you can choose to:
- Mount reTyre One and Winter Traveler only on the front wheel, for advanced users who wish to reduce rolling resistance even in the winter months;
- Mount Ice Racer on the front and Winter Traveler on the rear wheel, provides even better grip on the front combined with less rolling resistance on the back, which works great on deeper snow.
I am new to winter biking! Is there anything special I should know about using the studded tyres?
I lost some studs this season, is this normal?
Photos From Our Users
Add Related Products
Ice Racer Sizing Guide
Remember, Ice Racer adds approximately 6mm (0.23 inches) to the height and 14mm (0.5 inches) to the width of your reTyre One base tyre when mounted. In terms of standard sizing for tyres, the effective tyre size with skin is:
26'' = 50-559/26x2.0
28'' = 50-622/28x2.0
29" = 57-622/29x2.25
Most bikes will fit reTyre, but to be sure you measure the the areas depicted below.
63 mm clearance for the 26” and 28”
72 mm clearance for the 29”
Fenders can also be a problem, but most are easily adjustable to fit reTyre.