No, you need to buy a base tyre to use the reTyre system.
- reTyre ONE
- Trail Rider
- Winter Traveler
- DETAIL
- TECH SPECS
- HOW TO MOUNT
- FAQ
RETYRE ONE WIRE
reTyre One is our base tyre that allows you to continue cycling anywhere and all year long, without the hassle of removing the wheels to change the tyres. After one time installation you are reTyre ready and can adapt to any road condition in matter of seconds, just by zipping on the appropriate Skin.
reTyre One (Wire) is durable, fast-rolling asphalt tyre, perfect for your daily rides, road cycling and commuting, while integrated zipper lets you quickly adapt the tyre surface. Puncture protection and reflective stripe assure you get the best quality wire tyre and stay safe on your commute.
reTyre One (Wire) is durable, fast-rolling asphalt tyre, perfect for your daily rides, road cycling and commuting, while integrated zipper lets you quickly adapt the tyre surface. Puncture protection and reflective stripe assure you get the best quality wire tyre and stay safe on your commute.
Special Features:
- Puncture protection
- Reflective stripe
Fast Rolling
The fast-rolling, slick tread maximizes traction on asphalt roads and ensures a smooth ride.
Integrated Zipper
Our patented zip-on technology includes durable zippers integrated onto the side walls.
Exceptional Rubber
Our unique NXT rubber compound has the optimal balance between performance and durability.
SIZE INFORMATION
26" = 42-559/26x1.6
28" = 42-622/28x1.6
29" = 50-622/29x2.0
28" = 42-622/28x1.6
29" = 50-622/29x2.0
All reTyre skins are compatible and interchangeable with the reTyre One base tyre of the equivalent diameter.
PRODUCT WEIGHT
Size 26": 630g
Size 28": 700g
Size 29": 790g
1. Pin position
Attach the starting point to both sides of the tyre before closing the zipper. Check that the starting point is properly attached before you begin to close the zipper.
2. Stretch
While closing the zipper, stretch the skin a bit to make sure it fits perfectly. Alternate between the sides while you close the zippers to reduce the resistance. The skin should meet itself at the end.
3. Puller
Finally, when the skin is installed, remember to close the puller into the locked position to secure it.
1. Mount the base tyre on the rim like any conventional tyre and inflate to the recommended tyre pressure noted on the tyre.
2. We recommend that you let the tyre sit on the rim for 24 hours or have a short ride before mounting the skin.
This important step will allow the base tyre to expand and reach its normal size; which will guarantee a perfect fit between the skin and the base tire and the optimum conditions for use.
Can you use the Skins without the base tyre?
Which surfaces is this skin for?
All types of city roads, paved roads, tarmac, wet or dry asphalt.
What is the durability of the One Tyre?
Since the reTyre One tire is like any other regular tire, just with addition of zippers, the life expectancy is absolutely the same, only depending on your ride habits, storage, exposure to sun and different temperatures. For every manufactured batch of tires, we are sample testing for endurance on standardized test apparatus (with and without skin mounted), to ensure you get the best quality tire.
Do you need to deflate the base One tyre to zip on the Skin?
No. The Skins fit perfectly to base tyre (reTyre One) inflated and already used on your bike. No extra work required.
Can I mix and match different skins on reTyre One?
Yes, you can.
All reTyre skins are compatible and interchangeable with the reTyre One base tyre of the equivalent diameter.
What is the difference between reTyre One Wire and One Kevlar?
The main difference between the 2 tires is the material used in production. The bead is the part of the tire that comes into contact with the rim. Rigid type tires (also known as regular tires, wire tires) have a bead made using steel wire. This makes them durable and very stiff. Instead of using steel wire, folding bead tires use synthetic fibers like Kevlar. Kevlar is also a durable material but more flexible. This flexibility allows the tires to be folded and is lighter, so Kevlar tires are usually more lightweight than wire ones.
Should I choose One Wire or One Premium?
If you consider yourself an average cyclist and you are not looking for performance or weight saving on your daily rides, you can safely choose wire bead. However, if you are performance oriented and care about the additional weight, or if you are planning a long-distance bicycle touring trip and wish to have spare base tires, choosing reTyre One Premium with Kevlar beads will help you save space and weight on your trip, as they are easy-weight and foldable and can easily be brought in a backpack.
What size do I need?
You can check your current tire for the size and pick a matching one. Per industry standards, these are common:
26" = 42-559/26x1.6 - common size for Mountain bikes, but can also be found on City bikes
28" = 42-622/28x1.6 - most common standard for Hybrid and E-bikes
29" = 50-622/29x2.0 - works on the same rims as the 28", but is a bit larger, common for Mountain bikes
However, for reTyre system, beside the wheel size, you will need to make sure you have enough fork clearance. Check our Size Guide for more information.
- DETAIL
- TECH SPECS
- HOW TO MOUNT
- FAQ
TRAIL RIDER SKIN
Engineered in collaboration with mountain bikers to guarantee optimal results and ensure the best balance of performance, handling and off-road control, on technical trails, mud, wet and slippery ground. The features of the Trail Rider are also perfectly adapted to e-MTB.
At the end of your ride, remove the reTyre Trail Rider skins and use the fast-rolling reTyre One to cover the rest of the journey on paved road.
The next time you want to head out to nature, zip the Trail Rider Skin to your base tyre and enjoy the ride!
Predictable Cornering
The shoulder knobs are angled to optimize understeer traction and provide predictable handling and cornering
Maximum Traction
The large knobs are designed to grip into loose ground and ensure optimal grip for braking, acceleration and sharp cornering.
Soft Rubber
Our NXT rubber compound ensures optimal grip and traction on wet terrain
SIZE INFORMATION
Remember, Trail Rider adds approximately 6mm (0.23 inches) to the height and 14mm (0.5 inches) to the width of your reTyre One base tyre when mounted. In terms of standard sizing for tyres, the effective tyre size with skin is:
26'' = 50-559/26x2.0
28'' = 50-622/28x2.0
All reTyre skins are compatible and interchangeable with the reTyre One base tyre of the equivalent diameter.
PRODUCT WEIGHT
Size 26": 470g
Size 28": 510g
1. Pin position
Attach the starting point to both sides of the tyre before closing the zipper. Check that the starting point is properly attached before you begin to close the zipper.
2. Stretch
While closing the zipper, stretch the skin a bit to make sure it fits perfectly. Alternate between the sides while you close the zippers to reduce the resistance. The skin should meet itself at the end.
3. Puller
Finally, when the skin is installed, remember to close the puller into the locked position to secure it.
1. Pin position
Attach the starting point to both sides of the tyre before closing the zipper. Check that the starting point is properly attached before you begin to close the zipper.
2. Stretch
While closing the zipper, stretch the skin a bit to make sure it fits perfectly. Alternate between the sides while you close the zippers to reduce the resistance. The skin should meet itself at the end.
3. Puller
Finally, when the skin is installed, remember to close the puller into the locked position to secure it.
Can you use the Skins without the base tyre?
No, you need to buy a base tyre to use the reTyre system.
Do you need to deflate the base One tyre to zip on the Skin?
No. The Skins fit perfectly to base tyre (reTyre One) inflated and already used on your bike. No extra work required.
Which surfaces is this skin for?
Soft & loose grounds, mud and slippery rocks & roots.
Can I mix and match different skins?
Yes, you can.
Gravel Chaser Skin works great as a rear tyre for lower rolling resistance, in combination with the reTyre Trail Rider Skin mounted on the front wheel, for even better handling and control.
All reTyre skins are compatible and interchangeable with the reTyre One base tyre of the equivalent diameter.
- DETAIL
- TECH SPECS
- HOW TO MOUNT
- FAQ
WINTER TRAVELER SKIN
reTyre Winter Traveler gives you the opportunity to choose the bike all year-round. This skin will get you safely from point A to B on your daily commute, even through the winter months. Special configuration ensures that 4 studs are always in contact with the ground, but special design ensures low rolling resistance for the commute.
reTyre skins bring you the flexibility and convenience you need to cycle with confidence and serenity wherever you want, whenever you want it. Winter Traveler enables you to cycle longer in the fall and earlier in the spring, despite the morning frosts and varying weather conditions. If road conditions change during the day, simply remove Winter Traveler skins and continue cycling on the reTyre One base tyre.
Siping
Siping increase the number of edges on the knobs, which enhances the traction on icy roads.
160 Dual Compound Studs
With 160 dual compound studs this is our lightest winter skin. Designed to achieve maximum penetration and utilization of each stud.
Winter Rubber
Our NXT rubber compound ensures optimal grip and traction on wet terrain.
SIZE INFORMATION
Remember, Winter Traveler adds approximately 5mm (0.2 inches) to the height and 14mm (0.5 inches) to the width of your reTyre One base tyre when mounted. In terms of standard sizing for tyres, the effective tyre size with skin is:
26'' = 50-559/26x2.0
28'' = 50-622/28x2.0
29'' = 60-622/29x2.35
PRODUCT WEIGHT
Size 26": 530g with 146 studs
Size 28": 590g with 160 studs
Size 29": 790g with 160 studs
1. Pin position
Attach the starting point to both sides of the tyre before closing the zipper. Check that the starting point is properly attached before you begin to close the zipper.
2. Stretch
While closing the zipper, stretch the skin a bit to make sure it fits perfectly. Alternate between the sides while you close the zippers to reduce the resistance. The skin should meet itself at the end.
3. Puller
Finally, when the skin is installed, remember to close the puller into the locked position to secure it.
1. Pin position
Attach the starting point to both sides of the tyre before closing the zipper. Check that the starting point is properly attached before you begin to close the zipper.
2. Stretch
While closing the zipper, stretch the skin a bit to make sure it fits perfectly. Alternate between the sides while you close the zippers to reduce the resistance. The skin should meet itself at the end.
3. Puller
Finally, when the skin is installed, remember to close the puller into the locked position to secure it.
Can you use the Skins without the base tyre?
No, you need to buy a base tyre to use the reTyre system.
Do you need to deflate the base One tyre to zip on the Skin?
No. The Skins fit perfectly to base tyre (reTyre One) inflated and already used on your bike. No extra work required.
Which surfaces is this skin for?
Icy urban roads, light snow and black ice.
Can I mix and match different skins?
Yes, you can.
Depending on your ride style, weather conditions and personal preference, you can choose to:
- Mount reTyre One and Winter Traveler only on the front wheel, for advanced users who wish to reduce rolling resistance even in the winter months;
- Mount Ice Racer on the front and Winter Traveler on the rear wheel, provides even better grip on the front combined with less rolling resistance on the back, which works great on deeper snow.
Will the studs on the winter skins fall out?
No, but the tyre studs have a “running-in period" of minimum 25 km riding on asphalt, with low speeds and careful braking and turning in order for the studs to “fuse” together with the rubber, which is the norm for studded tyres.
I lost some studs this season, is this normal?
Yes, if you are actively riding in winter season it is normal to lose some of the studs, but you can order the studding tool with spare studs and easily ready your skins for the next season. No need to buy a new skin!
Customer Reviews
Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
All-Year Bundle (w. Trail Rider)
S
I started using my bike as a transport to work this summer. Before that I had used my bike to ride offroad in the weekends. The old offroad tires were worn down and I needed to replace these. At the same time I was thinking about rather buying slick tires for the transport to work. Luckily I came over these tires that had the possibility to quickly and easily change the tires. The tires are really quick and easy to change. Now i dont have to have two sets of rims to change the tires. Have rided 500+ km on these tires now and have not had any problems with the zippers. Seems like good quality. Looking forward to try the winter tires with spikes on the ice and snow conditions.
S
I typically ride pavement to work and singletrack home. When I saw this product on pinkbike I was so excited and despite the limited reviews, ordered a set. I absolutely loved them for a couple months. One morning unfortunately one of my trail rider skins lost the zipper on the trail. I didn’t notice until I went to remove them. I was really disappointed as I had been planning to use them for my first bikepacking overnighter the following weekend. I reached out to the company and it sounds like it was just a manufacturing defect. They got back to me within 15 minutes and not only was the company going to replace the skin free of charge, but they rushed the order to Northern Canada from Norway. Sure enough, they got here in time and the treads were a godsend the deep gravel and single track while the smoothie was great on the miles of pavement.
Photos From Our Users
Add Related Products
Will reTyre work on my bike?
To determine if your bike will fit reTyre, two measures you should consider are: the tire (rim) size and the fork clearance.
There are several ways of determining your tire size. If you already have a bike, you can check the size of your current tyres, the number is engraved on the tyre sidewall. If the information is not readable, you can measure the rim diameter and find corresponding size. If you are buying a new bike, check the tire and rim specification.
After determining the size, you should make sure you have enough clearance for both reTyre One and Skin of your choice. Depending of the size, minimum clearance you need is as follows:
63 mm clearance for the 26” and 28”
72 mm clearance for the 29”
Fenders can sometime be a problem, but most are easily adjustable to fit reTyre.